Andriod EN

From CMU ITSC Network
Revision as of 04:10, 15 August 2023 by Thomhathai (talk | contribs)

How to connect @JumboPlus or @JumboPlus 5 GHz for Andriod



  1. Go to Settings >> Wi-Fi >> Turn on Wi-Fi and then select @JumboPlus or @JumboPlus5GHz
    • If you only see the name @JumboPlus, it means your device supports the 2.4 GHz frequency only.**
    • If you see both names, it means your device supports the 5GHz frequency. It is recommended to connect to @JumboPlus5GHz. ***
 Please select only one name. If you choose both names on the same device, it may result in intermittent connectivity issues. 



JumboAndroid 1.jpg JumboAndroid 2.jpg

  1. Choose the profile settings as follows:
    • EAP method : PEAP
    • Phase 2 authentication : MSCHAPV2
    • CA certificate : Do not validate / unspecified ***

      JumboAndroid 3.jpg

    For some device models that do not support WPA2 Enterprise standard in the CA certificate section, you may not find the option "Do not validate / unspecified" or there might be a field to enter the Domain Name. In this case, it is recommended to temporarily connect to @JumboPlusIoT until the device receives a firmware update that supports the new standard. 
    >>>> How to connect @JumboPlusIoT <<<<
  2. Fill in CMU Account at Identity and Passwor and then click Connect
    • Student : Firstname_Surname@cmu.ac.th
    • Staff :Firstname.Surname@cmu.ac.th

      JumboAndroid 4.jpg

  3. After successfully connecting to @JumboPlus or @JumboPlus5GHz, the device will remember the connection for the next time when in a signal area. The device will automatically connect.


             JumboAndroid 5.jpg JumboAndroid 6.jpg