Andriod EN

From CMU ITSC Network
Revision as of 09:06, 10 August 2023 by Thomhathai (talk | contribs)

How to connect @JumboPlus or @JumboPlus 5 GHz for Andriod



  1. Go to Settings >> Wi-Fi >> Turn on Wi-Fi and then select @JumboPlus or @JumboPlus5GHz
    • If you only see the name @JumboPlus, it means your device supports the 2.4 GHz frequency only.**
    • If you see both names, it means your device supports the 5GHz frequency. It is recommended to connect to @JumboPlus5GHz. *** JumboAndroid 1.jpg JumboAndroid 2.jpg

  2. Choose the profile settings as follows:
    • EAP method : PEAP
    • Phase 2 authentication : MSCHAPV2
    • CA certificate : Do not validate / unspecified ***

      JumboAndroid 3.jpg

    For some device models that do not support WPA2 Enterprise standard in the CA certificate section, you may not find the option "Do not validate / unspecified" or there might be a field to enter the Domain Name. In this case, it is recommended to temporarily connect to @JumboPlusIoT until the device receives a firmware update that supports the new standard. 
    >>>> How to connect @JumboPlusIoT <<<<
  3. Fill in CMU Account at Identity and Passwor and then click Connect
    • Student : Firstname_Surname@cmu.ac.th
    • Staff :Firstname.Surname@cmu.ac.th

      JumboAndroid 4.jpg

  4. After successfully connecting to @JumboPlus or @JumboPlus5GHz, the device will remember the connection for the next time when in a signal area. The device will automatically connect.


             JumboAndroid 5.jpg JumboAndroid 6.jpg